Timing belt Optibelt 25 AT10 / 2300 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 25 AT10 / 2300 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 25 AT10 / 2300 AFX and any equivalents.
The Optibelt 25 AT10 / 2300 AFX is an Alpha Flex timing belt with an AT10 profile, a 2300 mm length and a 10 mm pitch. Before you fit a new synchronous belt, inspect the drive so the replacement starts on a sound basis.
Check the sheaves for worn tooth flanks, debris in the grooves and any damage that would affect tooth engagement. Confirm the shafts turn freely where they should and that the bearings show no play or roughness. A belt that fails early often points to a drive problem rather than the belt itself.
Verify alignment between the two sheaves and check that the tensioning arrangement moves smoothly through its range. Look for oil, heat or abrasion that could shorten belt life. Correct any issue before the new belt goes on.
If you are replacing a belt on a drive that runs more than one belt, fit the full set at the same time so the load is shared evenly. Note the part number from the back of the old belt and send it to us for a quote.
Dimensions
- Profile
- AT10
- Pitch
- 10mm
- Length
- 2300mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Read the marking on the back of the old belt and compare the profile and length. This belt is AT10 profile and 2300 mm long, with a 10 mm pitch. Send us the part number and any drive details if you want help confirming it.
- What should I check on the drive before fitting it?
- Inspect the sheaves for worn or damaged teeth, check alignment, confirm the tensioner moves freely, and look for oil or heat. Correct any problems so the new belt is not damaged at startup.
- Can you quote this belt from the part number?
- Yes. Send the part number 25 AT10 / 2300 AFX by WhatsApp or email and we will reply with a quote.