Timing belt Optibelt 25 AT10 / 11000 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 25 AT10 / 11000 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 25 AT10 / 11000 AFX and any equivalents.
The Optibelt 25 AT10 / 11000 AFX is an Alpha Flex timing belt with an AT10 profile, a 10 mm pitch and an 11000 mm length. This page covers how to match it to the belt you are replacing.
The most reliable starting point is the marking on the back of the old belt. Read the profile, pitch and length, then compare them with the AT10 profile, 10 mm pitch and 11000 mm length of the 25 AT10 / 11000 AFX. If the old belt is worn or the marking is unreadable, measure the length along the belt and confirm the profile by checking that the teeth match the pulley grooves.
Confirm the width and tooth pattern against the pulleys before ordering. The 25 AT10 / 11000 AFX is built to the AT10 profile, so the pulley grooves must match that profile. On long-center drives, check that the belt is routed correctly and that the tension is set according to the drive manufacturer's procedure.
If you are unsure whether this is the correct replacement, send the belt marking or a photo of the old belt by WhatsApp or email. We carry Optibelt and can help confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- AT10
- Pitch
- 10mm
- Length
- 11000mm
Frequently asked questions
- How do I match the 25 AT10 / 11000 AFX to my old belt?
- Start with the marking on the back of the old belt and compare the profile, pitch and length with the AT10 profile, 10 mm pitch and 11000 mm length of this belt. If the marking is gone, measure the length and check the tooth profile against the pulley grooves.
- What information should I send for a quote?
- Send the part number 25 AT10 / 11000 AFX, or the marking from your old belt, by WhatsApp or email. A photo of the old belt and the pulley can also help us confirm the correct replacement.
- Can you help if I am not sure this is the right belt?
- Yes. Send the belt marking or a photo of the old belt. We carry Optibelt and can help confirm the right belt or suggest an equivalent.