Timing belt Optibelt 25 / 8M 1504 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 25 / 8M 1504 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 25 / 8M 1504 AFX and any equivalents.
The Optibelt 25 / 8M 1504 AFX is an Alpha Flex timing belt with an HTD 8M profile. It measures 1504 mm in length on an 8 mm pitch. This page is for maintenance and purchasing staff matching it to the belt being replaced.
Start by reading the marking on the back of the belt you are removing. The part number 25 / 8M 1504 AFX identifies the profile, the length and the construction in one line. If the old belt is worn or the print is gone, measure the length and confirm the profile before you order. A belt that looks similar but differs in length or profile will not run correctly on the same pulleys.
The HTD 8M profile and the 1504 mm length are the two values to verify against the drive. Check the pulley grooves for wear and make sure the flanges are not bent. On a timing belt drive, the belt and the pulleys work as a set, so any damage on one side should be reviewed before the replacement goes on. If the old belt came off a drive with more than one belt, note how many are on the drive.
We carry the Optibelt 25 / 8M 1504 AFX Alpha Flex timing belt. Send the part number by WhatsApp or email and our team will confirm it for your application or suggest an equivalent. If you have the old belt in hand, a photo of the back marking and a measurement of the length help us match it quickly.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 1504mm
Frequently asked questions
- How do I confirm this is the right belt?
- Read the part number on the back of the belt being replaced and compare the profile and length. This belt is HTD 8M profile with a 1504 mm length and 8 mm pitch. If the marking is unreadable, measure the length and check the pulley groove profile.
- Can you help if I only have the old belt?
- Yes. Send a photo of the back marking and the measured length by WhatsApp or email. Our team will match it to the Optibelt 25 / 8M 1504 AFX or suggest an equivalent.
- What should I inspect when replacing a timing belt?
- Check the pulleys for worn grooves, damaged flanges or debris. Confirm the belt path and tensioner condition. A new belt on worn pulleys will not give full service life.