Timing belt Optibelt 25 / 8M 10400 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 25 / 8M 10400 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 25 / 8M 10400 AFX and any equivalents.
This Optibelt Alpha Flex timing belt is identified by the code 25 / 8M 10400 AFX. It uses the HTD 8M profile with an 8 mm pitch and a 10400 mm length. This type of belt is commonly used in industrial drives where exact timing and synchronization are required.
To confirm fit, compare the existing belt's markings with the profile, pitch, and length listed here. The HTD 8M profile and 8 mm pitch must match the pulley grooves. The 10400 mm length is the datum length for this belt, and the 25 indicates the width in millimeters.
When replacing, inspect the pulleys for wear, alignment, and proper tension. A timing belt that is not correctly tensioned can lead to premature failure or drive issues. If the old belt's marking is unreadable, measure the length and count the teeth to verify the pitch and profile.
For a quote, send the part number 25 / 8M 10400 AFX or the complete marking from the back of the belt. If you need help confirming the right belt or an equivalent, our team can assist based on the profile and length.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 10400mm
Frequently asked questions
- What does the code 25 / 8M 10400 AFX mean?
- The code identifies an Optibelt Alpha Flex timing belt with an HTD 8M profile, an 8 mm pitch, a 10400 mm length, and a 25 mm width. Always confirm these dimensions against your drive specifications.
- How can I confirm this belt fits my drive?
- Check that the pulley grooves match the HTD 8M profile and 8 mm pitch, and that the required length is 10400 mm. The width should be 25 mm. If you are unsure, send us the old belt's markings or photos of the drive.
- Can you help me find an equivalent if this exact belt is not what I need?
- Yes. Provide the profile, pitch, length, and width, and we can suggest a suitable alternative from the brands we carry. We will confirm the specifications before you order.