Timing belt Optibelt 25 / 5M 7600 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 25 / 5M 7600 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 25 / 5M 7600 AFX and any equivalents.
When you need to replace a timing belt, the fastest way to identify the correct part is to read the marking on the back of the old belt. This page covers the Optibelt 25 / 5M 7600 AFX from the Alpha Flex series, a timing belt with an HTD 5M profile and a 7600 mm length.
The marking on the back of a timing belt typically shows the profile and the length, and sometimes a manufacturer part number. On this belt, the profile is HTD 5M and the length is 7600 mm. The 5 mm pitch is the distance between the centers of two adjacent teeth, which you can confirm with a pitch gauge if the marking is worn.
Before ordering, inspect the drive for worn pulleys, misalignment, or damaged tensioners. A new belt on a worn drive can fail early. If the old belt marking is unreadable, measure the length by running a tape around the outside of the belt, or count the teeth and multiply by the 5 mm pitch. Send the complete part number, 25 / 5M 7600 AFX, along with the old belt marking, and our team will confirm the belt or suggest an equivalent.
Dimensions
- Profile
- HTD 5M
- Pitch
- 5mm
- Length
- 7600mm
Frequently asked questions
- How do I read the marking on my old timing belt?
- Look for a series of numbers and letters printed on the back of the belt. The profile, such as HTD 5M, and the length in millimeters, such as 7600, are usually included. If the marking is worn, measure the length or count the teeth and multiply by the 5 mm pitch.
- What does the 5M in the profile mean?
- The 5M indicates a 5 mm pitch, which is the distance from the center of one tooth to the center of the next tooth. This pitch is part of the HTD 5M profile.
- What information should I send to request a quote?
- Send the part number 25 / 5M 7600 AFX and any marking from the old belt. If the old belt is not readable, provide the profile, length, and width, and our team will help confirm the correct belt.