Timing belt Optibelt 25 / 5M 3200 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 25 / 5M 3200 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 25 / 5M 3200 AFX and any equivalents.
The Optibelt 25 / 5M 3200 AFX is an Alpha Flex timing belt with an HTD 5M profile and a 3200 mm length. Timing belts like this are used in drives where the belt teeth mesh with pulley grooves to synchronize rotation. This page covers where such a belt is typically found and how to confirm it fits your drive.
This belt's HTD 5M profile and 5 mm pitch mean it is intended for synchronous drives with matching 5M pulleys. The 3200 mm length is the datum to check against your existing belt or drive layout. Confirm the profile, pitch and length before ordering, and note the belt marking so we can match it.
To confirm fit, read the marking on the back of the old belt and compare it with the code 25 / 5M 3200 AFX. Check that the pulley grooves are clean and undamaged, and that the belt tracks correctly. If you are replacing a belt on a multi-belt drive, replace all belts as a set to keep loads even.
When you request a quote, send the full part number 25 / 5M 3200 AFX, the profile HTD 5M, the pitch 5 mm and the length 3200 mm, along with the quantity you need. If you are unsure, send a photo of the belt marking and we will help confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- HTD 5M
- Pitch
- 5mm
- Length
- 3200mm
Frequently asked questions
- What does the code 25 / 5M 3200 AFX tell me?
- The code identifies an Optibelt Alpha Flex timing belt with an HTD 5M profile, a 5 mm pitch and a 3200 mm length. Use these three values to match it to your drive.
- How do I confirm this belt fits my drive?
- Compare the profile, pitch and length with your existing belt and pulley markings. The belt marking on the back of the old belt is the best reference. If it matches HTD 5M, 5 mm pitch and 3200 mm, this belt is the correct size.
- What should I send for a quote?
- Send the part number 25 / 5M 3200 AFX, the profile HTD 5M, the pitch 5 mm and the length 3200 mm, plus the quantity you need. If you have a photo of the belt marking, include it so we can confirm the match.