Timing belt Optibelt 25 / 5M 10200 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 25 / 5M 10200 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 25 / 5M 10200 AFX and any equivalents.
The Optibelt 25 / 5M 10200 AFX is an Alpha Flex timing belt with an HTD 5M profile, a 10200 mm length, and a 5 mm pitch. We carry it for maintenance, engineering, and purchasing teams that need to match a belt to the one being replaced.
To match this belt to the one on your drive, read the marking on the back of the old belt. The profile, length, and pitch on this page are the three values to compare: HTD 5M, 10200 mm, and 5 mm. If the old belt is worn or the marking is unreadable, measure the length and count the teeth so the replacement can be checked against these figures.
When you request a quote by part number, send the code 25 / 5M 10200 AFX and the machine or drive reference. A photo of the back of the belt and the pulley grooves helps confirm that the HTD 5M profile and the 10200 mm length are the correct match before you order.
If the belt is part of a multi-belt drive, replace the set together so the load stays even across the pulleys. Inspect the pulleys and tensioner at the same time, and check that the new belt sits correctly in the grooves before returning the drive to service.
Dimensions
- Profile
- HTD 5M
- Pitch
- 5mm
- Length
- 10200mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Compare the profile, length, and pitch from the old belt marking with HTD 5M, 10200 mm, and 5 mm. If the marking is gone, measure the length and count the teeth, then send those figures with your quote request.
- What should I send with my quote request?
- Send the part number 25 / 5M 10200 AFX, the machine or drive reference, and a photo of the old belt and pulleys if possible. That lets us confirm the HTD 5M profile and 10200 mm length before you order.
- Should I replace more than one belt at a time?
- On a multi-belt drive, replace the full set together so the load is shared evenly. Check the pulleys and tensioner while the belts are off.