Timing belt Optibelt 25 / 14M 7798 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 25 / 14M 7798 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 25 / 14M 7798 AFX and any equivalents.
The Optibelt 25 / 14M 7798 AFX is an Alpha Flex timing belt with an HTD 14M profile and a 7798 mm length. Before you fit it, inspect the drive and the sheaves so the new belt runs true from the first start.
Check the sheave grooves for wear, corrosion or embedded debris, and confirm the grooves match the HTD 14M profile. A groove that no longer supports the belt correctly will shorten the life of the replacement. Verify that the shafts turn freely, that the bearings are sound, and that the structure holding the sheaves is rigid. Confirm the sheave alignment so the belt does not run against a flange or track to one side. Set the correct tension for this drive after the belt is in place.
The belt carries the Optibelt 25 / 14M 7798 AFX marking. If the old belt is worn or the marking is no longer clear, read the profile and length from the drive documentation or measure the belt so the replacement matches the HTD 14M profile and the 7798 mm length. The 14 mm pitch is fixed by the profile.
Send the part number 25 / 14M 7798 AFX by WhatsApp or email to request a quote. If you are unsure of the exact belt, send the marking from the back of the old belt, the profile and length, and a photo of the drive. We carry Optibelt and can help confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- HTD 14M
- Pitch
- 14mm
- Length
- 7798mm
Frequently asked questions
- What should I check on the drive before fitting this belt?
- Inspect the sheave grooves for wear or damage, confirm they match the HTD 14M profile, check that the shafts turn freely and the bearings are sound, and verify sheave alignment. Then tension the belt correctly for the drive.
- How do I confirm the belt if the old marking is unreadable?
- Use the drive documentation or measure the old belt to confirm the HTD 14M profile and the 7798 mm length. The pitch for this profile is 14 mm.
- What information do you need for a quote?
- Send the part number 25 / 14M 7798 AFX by WhatsApp or email. If you are unsure, include the marking from the back of the old belt, the profile and length, and a photo of the drive.