Timing belt Optibelt 25 / 14M 5950 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 25 / 14M 5950 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 25 / 14M 5950 AFX and any equivalents.
This Optibelt Alpha Flex belt is a timing belt in the HTD 14M profile, with a 5950 mm length and a 14 mm pitch. It is built for synchronous drives where the belt teeth mesh with a matching pulley to keep the driven shaft in step with the drive. If you are replacing a worn belt on a high-torque industrial drive, this page covers what to check before you order.
Timing belts of this type are common on drives where slip is not acceptable: the belt carries load through tooth engagement rather than friction. Confirm the fit by reading the marking on the back of the old belt and matching it to the profile and length here. The HTD 14M profile and 5950 mm length must both agree with your drive, and the pulley grooves should be inspected for wear or damage at the same time.
Before requesting a quote, note the belt marking, the pulley tooth count and the drive arrangement. If the old belt is worn or damaged, check the pulleys for worn teeth, the shafts for alignment and the tensioner for free movement. Replacing a timing belt is also a good moment to inspect the driven equipment for any condition that may have shortened belt life.
We carry the Optibelt 25 / 14M 5950 AFX and supply maintenance, engineering and purchasing teams across the United States, Canada, Mexico and South America. Send the part number by WhatsApp or email and the team will reply promptly to confirm the belt or suggest an equivalent.
Dimensions
- Profile
- HTD 14M
- Pitch
- 14mm
- Length
- 5950mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Read the marking on the back of the belt you are replacing. The profile must be HTD 14M, the length must be 5950 mm and the pitch must be 14 mm. If the marking matches, send it to us and we will confirm the Optibelt 25 / 14M 5950 AFX.
- What should I check on the drive before fitting a new belt?
- Inspect the pulley grooves for wear, check shaft alignment and make sure the tensioner moves freely. Worn pulleys or misalignment can shorten the life of a new timing belt.
- What information do you need for a quote?
- Send the part number 25 / 14M 5950 AFX, along with the belt marking or a photo of the old belt if you have it. If the marking is unclear, include the pulley tooth count and the drive arrangement so the team can help confirm the correct belt.