Timing belt Optibelt 25 / 14M 10906 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 25 / 14M 10906 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 25 / 14M 10906 AFX and any equivalents.
This Optibelt Alpha Flex timing belt is built for synchronous drives that need a positive, non-slip mesh between pulley and belt. The 25 / 14M 10906 AFX carries an HTD 14M profile with a 10906 mm length and a 14 mm pitch, so it fits drives designed around that geometry. Use the marking on the belt and the drive's pulley data to confirm the match before ordering.
Synchronous belts like this one are common on drives where shaft speed must stay tied to shaft position: main process drives, cam and auxiliary sections, and other equipment where a V-belt would slip. The HTD 14M profile and 14 mm pitch mean the pulley grooves must be cut for that same profile. Check the belt's back marking against the part number on the old belt, and confirm the length against the drive layout.
If the old belt is worn or the marking is unreadable, measure the drive rather than guessing. Count the pulley teeth, note the pulley diameters, and check the center distance. Send the part number 25 / 14M 10906 AFX, or those drive details, by WhatsApp or email and our team will confirm the belt or suggest an equivalent.
On multi-belt drives, replace all belts in the set at the same time so the load stays even across the grooves. Inspect the pulleys for worn grooves, debris or misalignment while the belt is off, and re-tension to the drive manufacturer's specification.
Dimensions
- Profile
- HTD 14M
- Pitch
- 14mm
- Length
- 10906mm
Frequently asked questions
- How do I confirm this timing belt fits my drive?
- Match the HTD 14M profile and 14 mm pitch to the pulley grooves, and confirm the 10906 mm length against the drive layout. The part number on the back of the old belt is the fastest check.
- What should I send for a quote?
- Send the part number 25 / 14M 10906 AFX by WhatsApp or email. If the marking is gone, send the pulley tooth count, pulley diameters and center distance instead.
- Should I replace more than one belt at a time?
- On a multi-belt drive, replace the full set together so each belt carries the same load. Inspect the pulleys for wear or misalignment before installing the new belts.