V-belt Optibelt 2426V 353
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- Vario Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 2426V 353 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 2426V 353 and any equivalents.
The Optibelt Vario Power 2426V 353 is a variable speed belt with a length of 897 mm. We carry it for variable speed drive service. Before you fit a new belt, inspect the drive so the replacement is not damaged by a fault that is still there.
Check the sheaves first. Look at the groove faces for wear, scoring, or a step where the belt has been running. On a variable speed drive, the belt rides on the sheave faces, so worn faces let the belt sit too low and change the ratio. Clean the grooves and confirm the sheaves move freely through their full range.
Check alignment and the rest of the drive. Misalignment between the two sheaves will wear the belt edge and shorten its life. Look at the shaft bearings for play and check that the belt tension is set to the drive maker's figure. If the old belt failed early, find the cause before fitting the new one.
The belt is marked 2426V 353 with a length of 897 mm. Send that marking, or the part number, by WhatsApp or email and the team will confirm it or suggest an equivalent. If two belts run on one drive, order them together so the pair is matched.
Dimensions
- Length
- 897mm
Frequently asked questions
- What do I need to send for a quote on this belt?
- Send the part number 2426V 353, or the full marking from the back of the belt, and the length if you have it. A photo of the belt and the drive helps confirm the right item.
- What should I check before fitting a variable speed belt?
- Inspect the sheave faces for wear and scoring, confirm the sheaves move through their full range, check alignment between the two sheaves, and check the shaft bearings for play.
- Can you help if this belt is not the right one for my drive?
- Yes. Send the belt marking and details of the drive, and the team will confirm the 2426V 353 or suggest an equivalent.