Timing belt Optibelt 2200 8M 85 HILO
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega High Load
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 2200 8M 85 HILO belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 2200 8M 85 HILO and any equivalents.
The Optibelt 2200 8M 85 HILO is an Omega High Load timing belt with an HTD 8M profile, a 2200 mm length and an 8 mm pitch. When you are replacing a belt, the marking on the back of the old belt is the first thing to check. This page covers how to match that marking to the belt you need.
Start by reading the back of the belt being replaced. Confirm the profile reads HTD 8M, then confirm the length reads 2200 mm and the pitch reads 8 mm. The Optibelt 2200 8M 85 HILO matches those three values. If your old belt shows a different profile or length, this is not the correct replacement.
If the marking is worn or unreadable, measure the old belt and check the drive components. The profile must match the pulley grooves: an HTD 8M belt requires HTD 8M pulleys. The length must match the drive layout, and the 8 mm pitch is set by the profile. Do not substitute a belt with a different profile or length.
Send the part number 2200 8M 85 HILO by WhatsApp or email to request a quote. If the old belt is still on the drive, send a photo of the back marking and the pulley teeth. Our team can confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 2200mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Read the back of the belt being replaced. The profile should be HTD 8M, the length 2200 mm and the pitch 8 mm. The Optibelt 2200 8M 85 HILO matches those values. Also confirm the pulleys are HTD 8M.
- What if the old belt marking is gone?
- Measure the old belt and check the pulley grooves. An HTD 8M belt needs HTD 8M pulleys, a 2200 mm length and an 8 mm pitch. If you are unsure, send photos of the belt and pulleys with your request.
- How do I request a quote?
- Send the part number 2200 8M 85 HILO by WhatsApp or email. If you need help confirming the belt, include a photo of the back marking and the pulley teeth with your request.