Timing belt Optibelt 2200 8M 30 HIPO
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega High Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 2200 8M 30 HIPO belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 2200 8M 30 HIPO and any equivalents.
When you replace a timing belt, the most reliable approach is to match the belt you are removing. The Optibelt 2200 8M 30 HIPO is a timing belt in the Omega High Power series with an HTD 8M profile, a 2200 mm length and an 8 mm pitch. Confirm these three values against the old belt before you request a quote.
Start by reading the marking on the back of the belt being replaced. You are looking for the profile, the length and the part number. This belt carries the code 2200 8M 30 HIPO. The profile is HTD 8M, the length is 2200 mm and the pitch is 8 mm. If the marking is worn or unreadable, measure the old belt and compare the profile and length to the data on this page.
A timing belt is selected by profile and length first. The HTD 8M profile and the 2200 mm length are the two numbers that must line up with the drive. The 8 mm pitch is part of the HTD 8M profile. If the belt you remove shows the same profile and length, this Optibelt belt is the correct size to quote.
Send the part number 2200 8M 30 HIPO, or the profile and length from the old belt, by WhatsApp or email. Our team can confirm the belt or suggest an equivalent. Include the application details and any other markings from the old belt so we can check the match.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 2200mm
Frequently asked questions
- What part number should I send to request a quote?
- Send 2200 8M 30 HIPO. If you do not have the part number, send the profile and length from the old belt, such as HTD 8M and 2200 mm.
- How do I confirm this belt matches the one I am replacing?
- Check the marking on the back of the old belt. The profile should be HTD 8M and the length should be 2200 mm. The pitch is 8 mm. If those match, this belt is the same size.
- Can you help if the old belt marking is unreadable?
- Yes. Send photos of the old belt and the drive, along with any measurements you can take. Our team can help confirm the right belt or suggest an equivalent.