Timing belt Optibelt 2200 8M 20 HILO
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega High Load
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 2200 8M 20 HILO belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 2200 8M 20 HILO and any equivalents.
This Optibelt 2200 8M 20 HILO is an Omega High Load timing belt with an HTD 8M profile, an 8 mm pitch and a 2200 mm length. Before you fit it, inspect the drive and sheaves so the new belt runs true and lasts. Request a quote by part number through WhatsApp or email.
Start by locking out the drive and checking sheave condition. Look for worn grooves, corrosion, burrs or debris that can damage the belt. Confirm the sheaves match the HTD 8M profile and that the 8 mm pitch is correct for the pulleys. Misalignment or a damaged sheave will shorten belt life even when the replacement is correct.
Check the overall drive: verify that the shafts turn freely, that bearings are not rough, and that the structure holding the sheaves is secure. Clean the sheave grooves and inspect the old belt for uneven wear, cracks or missing teeth. These signs often point to a drive issue that should be corrected before the Optibelt 2200 8M 20 HILO is installed.
When you are ready to order, send the part number 2200 8M 20 HILO and the quantity you need. If you are unsure whether this HTD 8M profile and 2200 mm length fit your drive, include the belt marking and the sheave details in your message. Our team will confirm the belt or suggest an equivalent.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 2200mm
Frequently asked questions
- What should I check on the drive before fitting this belt?
- Inspect the sheaves for wear, corrosion, burrs and debris, confirm they match the HTD 8M profile and 8 mm pitch, and check alignment, bearings and shaft freedom. Correct any issues before installing the new belt.
- How do I identify the belt I need to replace?
- Read the marking on the back of the old belt. This Optibelt belt is marked 2200 8M 20 HILO, with an HTD 8M profile, an 8 mm pitch and a 2200 mm length. Send that marking for a quote.
- What information should I send for a quote?
- Send the part number 2200 8M 20 HILO and the quantity. If you are unsure about the fit, include the old belt marking and details of the sheaves and drive so we can confirm the right belt or suggest an equivalent.