V-belt Optibelt 22 x 8000 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 22 x 8000 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 22 x 8000 Li and any equivalents.
The Optibelt VB S=C Plus 22 x 8000 Li is a classical V-belt with a C profile, a 22 mm top width and an 8000 mm length. It is built to a 40-degree angle and a 14 mm height. To match it correctly to the belt being replaced, start with the marking on the old belt and compare profile and length before ordering.
When the drive is down, the fastest way to confirm the replacement is to read the marking on the back of the old belt. Look for the profile letter and the length figure, then compare them with the C profile and 8000 mm length of this Optibelt VB S=C Plus belt. A belt that is the same profile but a different length will not sit correctly in the sheave grooves, so both values matter.
If the old marking is worn or missing, measure across the top of the belt and around its outside length. This belt has a 22 mm top width and a 14 mm height, which corresponds to the C profile. Its 40-degree angle is the standard V shape that seats in the pulley groove. Confirm the replacement against the drive's sheave groove dimensions and the existing belt's cross-section.
Send the part number 22 x 8000 Li, or the profile and length you measured, by WhatsApp or email. We carry the Optibelt VB S=C Plus line and can help confirm the right belt or suggest an equivalent from what we supply. For drives with more than one belt, note the full set so all belts are matched.
Dimensions
- Section
- C
- Length
- 8000mm
Frequently asked questions
- How do I match this belt to the one I am replacing?
- Read the marking on the back of the old belt. If it shows a C profile and 8000 mm length, this Optibelt VB S=C Plus 22 x 8000 Li is the direct match. If the marking is unreadable, measure the top width and outside length and compare with the 22 mm top width and 8000 mm length listed here.
- Can I use a different profile if the length is the same?
- No. Profile and length both have to match. This belt is a C profile with a 22 mm top width and a 14 mm height. A different profile will not seat correctly in the sheave grooves even if the length is the same.
- What information should I send for a quote?
- Send the part number 22 x 8000 Li, or the profile letter and length from the old belt. If you are replacing a set, include the number of belts on the drive so we can help you confirm the right quantity.