V-belt Optibelt 22 x 5000 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 22 x 5000 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 22 x 5000 Li and any equivalents.
This Optibelt VB S=C Plus belt is a classical V-belt with a C profile, a top width of 22 mm, a height of 14 mm, and a 40-degree angle. Its length is 5000 mm. Before you fit it, inspect the drive and sheaves, because worn grooves or misalignment will shorten the life of any new belt.
Check the sheaves for wear, rust, and buildup in the grooves. Look for grooves that have become wider or stepped, and confirm that the sheaves are aligned and tight on their shafts. A straightedge across the sheave faces will show misalignment. If a sheave is worn beyond its useful shape, the new belt will not seat correctly and will slip or wear quickly.
Inspect the rest of the drive as well: bearings for play or rough turning, guards for rubbing, and the tensioning mechanism for free movement. Clean the grooves before installation. When you fit the belt, tension it according to the drive manufacturer's specification, then recheck tension after the first run-in period.
The belt is marked 22 x 5000 Li, with a C profile, a top width of 22 mm, a height of 14 mm, and a 40-degree angle. To request a quote, send that part number by WhatsApp or email. If you are replacing a belt on a drive that uses multiple belts, it is good practice to replace them as a set so the load is shared evenly.
Dimensions
- Section
- C
- Length
- 5000mm
Frequently asked questions
- What does the marking 22 x 5000 Li mean on this Optibelt belt?
- The marking identifies the belt as a classical V-belt with a C profile, a top width of 22 mm, a height of 14 mm, and a length of 5000 mm. The 40-degree angle is also part of the profile. Use these dimensions to compare with the belt you are replacing.
- How do I check the sheaves before installing this belt?
- Inspect the grooves for wear, rust, and buildup, and check that the sheaves are aligned and secure on their shafts. Clean the grooves and confirm that the tensioning mechanism moves freely. Worn or misaligned sheaves will reduce belt life.
- Can you help confirm this is the right belt for my drive?
- Yes. Send the part number 22 x 5000 Li, along with any photos or details of the old belt and the drive, by WhatsApp or email. We will help confirm the profile and length, and suggest an equivalent if needed.