V-belt Optibelt 22 x 2560 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 22 x 2560 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 22 x 2560 Li and any equivalents.
This Optibelt VB S=C Plus belt is a classical V-belt with a C profile and a 2560 mm length. The marking 22 x 2560 Li gives the top width and the inside length, so you can compare it directly with the belt you are replacing.
To match it, read the old belt's back marking. You need the same profile letter and the same length figure. This belt has a 22 mm top width, a 14 mm height and a 40 degree angle, and its length is 2560 mm. If those figures match the belt on the drive, this is the correct replacement.
If the old marking is worn or missing, measure the top width and the inside length of the belt and compare them with the values above. Profile C belts are used where a wider cross-section is needed, and the 40 degree angle is standard for this type. Confirm the drive uses a classical V-belt and not a narrow wedge, cogged or banded belt before ordering.
Send the part number 22 x 2560 Li, or your measurements, by WhatsApp or email. The team can confirm the belt or suggest an equivalent. For drives with multiple belts, replace all belts at the same time so they share the load evenly.
Dimensions
- Section
- C
- Length
- 2560mm
Frequently asked questions
- How do I confirm this belt matches the one I am replacing?
- Check the back marking of the old belt for the profile letter and the length. This belt is profile C with a 2560 mm length, a 22 mm top width and a 14 mm height. If those numbers match, it is the correct replacement.
- What should I send to get a quote?
- Send the part number 22 x 2560 Li, or the profile and length from your old belt, by WhatsApp or email. If you have the old belt, a photo of the back marking helps confirm the match.
- Can I replace just one belt on a multi-belt drive?
- It is good practice to replace all belts on the drive at the same time. Belts wear together, and mixing a new belt with old ones can cause uneven load sharing.