V-belt Optibelt 22 x 2286 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 22 x 2286 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 22 x 2286 Li and any equivalents.
This Optibelt VB S=C Plus belt is a classical V-belt in profile C, with a 22 mm top width, 14 mm height, a 40° angle and a length of 2286 mm. The marking 22 x 2286 Li identifies the belt you are replacing. Match the profile and the length on the old belt before you order.
The most reliable way to select this belt is to read the marking on the back of the belt being replaced. Confirm the profile is C and the length is 2286 mm, and check that the top width is 22 mm and the height is 14 mm. If the old belt is worn or the marking is unreadable, measure the top width and the outside length and compare them with these figures. A belt that is too narrow or too long will not sit correctly in the pulley groove.
Inspect the drive before fitting a new belt. Check the pulley grooves for wear, the alignment of the pulleys and the condition of the take-up adjustment. A worn groove or misaligned pulley can destroy a new belt quickly. When a drive uses more than one belt, replace all belts in the set at the same time so the load is shared evenly.
We carry the Optibelt VB S=C Plus 22 x 2286 Li for maintenance, engineering and purchasing teams in the United States, Canada, Mexico and South America. To request a quote, send the part number 22 x 2286 Li by WhatsApp or email. If you are unsure of the profile or length, send the marking from the old belt and our team will confirm the right belt for your drive.
Dimensions
- Section
- C
- Length
- 2286mm
Frequently asked questions
- How do I confirm this is the belt I need?
- Read the marking on the back of the belt being replaced. It should show profile C and a length of 2286 mm. You can also measure the top width, which should be 22 mm, and the height, which should be 14 mm.
- What should I send to request a quote?
- Send the part number 22 x 2286 Li by WhatsApp or email. If you do not have the part number, send the marking from the old belt or the measured profile, top width and length.
- Should I replace all belts on the drive at once?
- Yes. On a drive that uses more than one belt, replace the full set together. Mixing a new belt with worn belts can cause uneven load sharing and shorten belt life.