Timing belt Optibelt 216 3M 6
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- HTD
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 216 3M 6 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 216 3M 6 and any equivalents.
This Optibelt 216 3M 6 is an HTD timing belt with a 3 mm pitch and a 216 mm length. It is the belt to reference when you are replacing an existing synchronous drive belt and need to match profile and length exactly.
To match it to the belt being replaced, read the marking on the back of the old belt. Confirm the profile is HTD 3M, the length is 216 mm, and the pitch is 3 mm. If the marking is worn, measure the length and identify the tooth profile before ordering.
The 216 3M 6 is a synchronous belt, so it must match the pulley grooves and the center distance of the drive. A belt with the same profile and length is required for correct tooth engagement. If the old belt is damaged, inspect the pulleys for wear or debris before installing the replacement.
We carry the Optibelt 216 3M 6 for maintenance, engineering, and purchasing teams. Send the part number, the profile, and the length by WhatsApp or email to request a quote. If you are unsure of the exact belt, include a photo of the old belt marking and the pulley details.
Dimensions
- Profile
- HTD 3M
- Pitch
- 3mm
- Length
- 216mm
Frequently asked questions
- How do I confirm the Optibelt 216 3M 6 is the right belt?
- Check the marking on the back of the belt you are replacing. It should show the profile HTD 3M, the length 216 mm, and the pitch 3 mm. If the marking is not readable, measure the length and count the teeth to confirm the profile.
- Can I use this belt if the old belt marking is worn off?
- Yes, but you need to identify the profile and length by measuring. The drive requires an HTD 3M profile with a 216 mm length and 3 mm pitch. Send photos of the belt and pulleys if you need help confirming.
- What information should I send with my quote request?
- Send the part number 216 3M 6, the profile HTD 3M, and the length 216 mm. If you are replacing a belt, include the old belt marking and any pulley details. We reply by WhatsApp or email.