Timing belt Optibelt 2000 D5M 25
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 2000 D5M 25 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 2000 D5M 25 and any equivalents.
The Optibelt Omega 2000 D5M 25 is a double-sided timing belt with a 2000 mm length. Both faces carry teeth, so it drives from either side in reversing or dual-shaft layouts. We carry this belt for maintenance and purchasing teams who order by part number.
Before you fit a double-sided timing belt, inspect the drive. Check both tooth faces of the pulleys and sheaves for wear, chipping or build-up in the grooves, since a double-sided belt contacts two sets of flanges. Confirm the pulleys turn freely, check the bearings for play or noise, and look at the shafts and mounting hardware for movement. Any worn component will shorten the life of the new belt.
Then verify alignment. The pulleys must sit square to each other, and the belt should run straight without riding against a flange. On a double-sided drive, misalignment on one side shows up as edge wear on the opposite face. Set the tension to the drive manufacturer's specification and recheck it after the first run-in period.
The belt is marked 2000 D5M 25. Read the marking on the back of the old belt before you order, and send that part number by WhatsApp or email. Our team replies promptly and can confirm the right belt for your drive.
Dimensions
- Length
- 2000mm
Frequently asked questions
- How do I identify this belt on the machine?
- Look for the marking printed on the belt. The Optibelt Omega 2000 D5M 25 shows a 2000 mm length and a 25 marking, which is the width. Send that full marking and a photo of the drive if you can.
- What should I check before ordering a replacement?
- Check both pulley faces for worn or chipped grooves, confirm the bearings and shafts are sound, and verify the pulleys are aligned. Note the belt marking so we can match the part number you need.
- How do I request a quote?
- Send the part number 2000 D5M 25 by WhatsApp or email. Our team replies promptly and can confirm the belt for your application.