Timing belt Optibelt 200 / H 595 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 200 / H 595 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 200 / H 595 AFX and any equivalents.
This Optibelt 200 / H 595 AFX is an H-profile timing belt from the Alpha Flex series, with a length of 1511.3 mm. The profile and length are the two numbers a buyer needs to match a synchronous drive before anything else. We carry this belt and quote it by part number.
The H profile sets the tooth geometry and pitch that the pulleys must match. The 1511.3 mm length is the datum for the drive center distance and take-up. If the marking on the old belt reads H and the measured length is 1511.3 mm, this is the size to compare against.
Replacement decisions usually start at the belt back. Read the profile and length there, then confirm the pulley teeth are clean and the flanges are not worn. A belt that runs to one side or shows uneven tooth wear points to a drive alignment issue, not a belt size issue.
For a quote, send the part number 200 / H 595 AFX and the quantity. If the old belt marking is hard to read, send the profile and length you measured and the drive details, and we will help confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- H
- Length
- 1511.3mm
Frequently asked questions
- What do the profile and length mean on this Optibelt belt?
- The H profile defines the tooth shape and pitch, and 1511.3 mm is the belt length. Both must match the drive for the belt to seat correctly.
- How do I confirm this is the right belt for my drive?
- Check the marking on the back of the old belt for the H profile and the 1511.3 mm length. If those match, this is the same size.
- What should I send to get a quote?
- Send the part number 200 / H 595 AFX and the quantity you need. If the old marking is not clear, send the profile and length you measured and the drive details.