Timing belt Optibelt 200 / H 2285 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 200 / H 2285 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 200 / H 2285 AFX and any equivalents.
The Optibelt 200 / H 2285 AFX is a timing belt in the Alpha Flex series with an H profile and a length of 5803.9 mm. To match it to the belt you are replacing, confirm the profile and length on the old belt before ordering.
Start by reading the marking on the back of the belt you are removing. Look for the profile (H) and the length (2285 mm or 5803.9 mm) so you can compare them directly with the Optibelt 200 / H 2285 AFX. If the old belt is worn or the marking is unreadable, measure the length along the belt's pitch line and check the tooth profile against the pulley grooves.
For a correct fit, the profile and length must match. The H profile and 5803.9 mm length are the key dimensions for this belt. If your drive uses more than one belt, inspect all belts in the set and replace them together to keep load sharing even.
When you request a quote, send the part number 200 / H 2285 AFX and, if possible, a photo of the old belt's marking. Our team will confirm the correct belt or suggest an equivalent based on the profile and length you provide.
Dimensions
- Profile
- H
- Length
- 5803.9mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Check the marking on your old belt for the profile (H) and length (2285 mm or 5803.9 mm). If those match the Optibelt 200 / H 2285 AFX, it is the correct replacement.
- What should I send to get a quote?
- Send the part number 200 / H 2285 AFX and, if you have it, a photo of the old belt's back marking. That helps us verify the profile and length.
- Can I replace just one belt in a multi-belt drive?
- It is best to replace all belts in the set at the same time so they share the load evenly. Mixing new and worn belts can lead to uneven tension and premature failure.