Timing belt Optibelt 20 AT10 / 880
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Torque
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 20 AT10 / 880 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 20 AT10 / 880 and any equivalents.
This Optibelt Alpha Torque belt is a timing belt with an AT10 profile and a length of 880 mm. The pitch is 10 mm. It is used on synchronous drives where the belt teeth mesh with matching pulleys to keep the driven shaft in step with the driver.
To confirm fit, compare the marking on the back of the old belt with the part number 20 AT10 / 880. Check that the profile is AT10 and the length is 880 mm, and that the pitch is 10 mm. The pulley grooves must match the AT10 profile. If the old belt is worn or the marking is unreadable, measure the length and count the teeth so we can help you match it.
Timing belts are common on industrial drives that need synchronized motion, such as positioning axes and other equipment where slip is not acceptable. Inspect the pulleys for worn grooves, check the tension and alignment, and look for cracking, missing teeth or exposed cords on the belt. Replace the belt when it shows any of these signs. If you need help identifying the right belt, send the part number, the profile and the length to our team by WhatsApp or email.
Dimensions
- Profile
- AT10
- Pitch
- 10mm
- Length
- 880mm
Frequently asked questions
- What profile and length does this belt have?
- It has an AT10 profile and a length of 880 mm, with a pitch of 10 mm.
- How do I confirm this belt fits my drive?
- Check the marking on the old belt against 20 AT10 / 880. Confirm the profile is AT10, the length is 880 mm and the pitch is 10 mm. The pulleys must have matching AT10 grooves.
- What should I send for a quote?
- Send the part number 20 AT10 / 880, or the profile and length, by WhatsApp or email. If the marking is worn, include the length and tooth count so we can help confirm the right belt.