Timing belt Optibelt 20 / 8M 2704 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 20 / 8M 2704 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 20 / 8M 2704 AFX and any equivalents.
The Optibelt 20 / 8M 2704 AFX is an Alpha Flex timing belt with an HTD 8M profile, an 8 mm pitch and a 2704 mm length. It is the belt to specify when you are replacing a worn synchronous belt and need the same profile and length. We carry this belt and quote it by part number.
Matching starts with the belt you are removing. Read the marking on the back of the old belt and compare it with the profile and length on this page. The replacement needs the same HTD 8M profile, the same 8 mm pitch and the same 2704 mm length. If the old belt is worn or the marking is difficult to read, measure the length and confirm the profile before ordering.
Inspect the drive at the same time. Check the pulleys for wear, confirm the belt sits correctly in the grooves, and verify alignment and tension. A belt that fails early often points to a drive issue rather than the belt itself. Replacing the belt without checking the pulleys can lead to repeated failures.
For a quote, send the part number 20 / 8M 2704 AFX by WhatsApp or email. If you are unsure whether this is the correct belt, send the marking from the old belt and the pulley details. We will confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 2704mm
Frequently asked questions
- How do I confirm this belt matches the one I am replacing?
- Compare the marking on the old belt with the profile and length here. This belt is HTD 8M with an 8 mm pitch and a 2704 mm length. If the old marking is unreadable, measure the length and check the pulley profile.
- What should I check on the drive before installing a new belt?
- Inspect the pulleys for wear, confirm the belt seats correctly in the grooves, and check alignment and tension. Correcting drive issues at the same time helps the new belt run as intended.
- What information do you need to quote this belt?
- Send the part number 20 / 8M 2704 AFX by WhatsApp or email. If you want us to verify the match, include the marking from the old belt and the pulley details.