Timing belt Optibelt 20 / 8M 1104 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 20 / 8M 1104 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 20 / 8M 1104 AFX and any equivalents.
This Optibelt Alpha Flex timing belt is identified by the code 20 / 8M 1104 AFX. It uses an HTD 8M profile with an 8 mm pitch and a length of 1104 mm. It is a synchronous belt intended for drives that require tooth engagement rather than friction.
Timing belts of this type are used where a drive must keep a fixed relationship between two shafts, such as camshafts, pumps, and other synchronized equipment. The HTD 8M profile and 1104 mm length are the two dimensions to confirm before ordering. Check that the old belt marking matches 20 / 8M 1104 AFX, or measure the profile and length directly.
If you are replacing a belt on a drive, inspect the pulleys for worn teeth, debris, or misalignment at the same time. A belt that fails early often points to a pulley or tension issue rather than the belt itself. When a drive uses more than one belt, replace them as a set so the load is shared evenly.
To request a quote, send the part number 20 / 8M 1104 AFX by WhatsApp or email. Our team replies promptly and can help confirm the right belt or suggest an equivalent based on the profile and length you provide.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 1104mm
Frequently asked questions
- How do I confirm this is the correct belt?
- Read the marking on the back of the old belt. It should show the same code, 20 / 8M 1104 AFX, or at least the HTD 8M profile and 1104 mm length. If the marking is unreadable, measure the pitch and the length and send those details.
- What does the 8M profile mean for fit?
- The 8M indicates an HTD profile with an 8 mm pitch. The pulley must have a matching HTD 8M groove. A different profile will not seat correctly even if the length is close.
- Can you help if I only have the old belt?
- Yes. Send a photo of the belt marking or the dimensions you measure, and our team will help match it to the Optibelt 20 / 8M 1104 AFX or another suitable belt.