V-belt Optibelt 2-SPC 9000 BP2

OPTIBELT 2-SPC 9000 BP2 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 2-SPC 9000 BP2 and any equivalents.

The Optibelt 2-SPC 9000 BP2 is a banded V-belt from the KB Blue Power 2 series, with a length of 9000 mm. It is built for drives where two or more V-belts run as a matched set on the same sheave grooves. Before you fit it, check the drive and sheaves so the new belt seats and tracks correctly.

Inspect each sheave groove for wear, burrs, rust or embedded debris. Worn grooves let a new banded V-belt sit too low, which leads to slip and heat. Check that the sheaves are aligned and that the grooves are clean and dry. Confirm the groove profile matches the belt cross-section, and spin the drive by hand to feel for rough bearings or obstructions.

A banded V-belt ties its ribs together, so it must run on grooves that are all in the same condition. If one groove is worn or damaged, the banded belt cannot compensate and will wear unevenly. Replace worn sheaves or have them machined before fitting the new belt. Set tension to the drive manufacturer's specification, then recheck after the first run-in period.

The Optibelt 2-SPC 9000 BP2 carries the KB Blue Power 2 series marking and a 9000 mm length. To request a quote, send the part number 2-SPC 9000 BP2 by WhatsApp or email. Our team can confirm the belt or suggest an equivalent for your drive.