V-belt Optibelt 2-SPC 7500 BP2
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- KB Blue Power 2
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 2-SPC 7500 BP2 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 2-SPC 7500 BP2 and any equivalents.
The Optibelt 2-SPC 7500 BP2 is a banded V-belt from the KB Blue Power 2 series, with a length of 7500 mm. When you are replacing a belt on a driven machine, the marking on the old belt is the fastest way to confirm you are ordering the same item. Read it before you pull the belt, and order against that number.
Start with the code on the back of the belt being replaced. A banded V-belt carries its profile and length in that marking, and the 2-SPC 7500 BP2 identifies both the profile and the 7500 mm length. If the marking is worn, photograph it where it sits and measure the belt with the drive locked out, then compare what you find against the number you intend to order.
Because this is a banded V-belt, it runs as a set of joined ribs in one unit. Replace it as a complete belt rather than substituting single V-belts, which would change how the drive carries load across the sheave grooves. Check the sheaves for worn groove flanks and any debris while the belt is off, since those conditions affect how a new banded belt seats.
Send the part number 2-SPC 7500 BP2 by WhatsApp or email and our team will confirm it against your request. If you have the old belt in hand, include a photo of the back marking and the machine details so the profile and the 7500 mm length can be checked before we quote.
Dimensions
- Length
- 7500mm
Frequently asked questions
- How do I confirm this is the belt I need to replace?
- Read the marking on the back of the belt currently fitted. If it reads 2-SPC 7500 BP2, that is the item to order. If it is worn or unreadable, photograph it in place and send that with your request.
- Can I replace a banded V-belt with individual V-belts?
- No. A banded V-belt is built as joined ribs in a single unit, so it should be replaced as a complete belt. Substituting single belts changes how the drive carries load across the sheave grooves.
- What should I send for a quote?
- Send the part number 2-SPC 7500 BP2 by WhatsApp or email, along with the machine details and, if you have it, a photo of the marking on the belt being replaced.