V-belt Optibelt 2-D 8000
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- KB VB
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 2-D 8000 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 2-D 8000 and any equivalents.
The Optibelt 2-D 8000 is a banded V-belt from the KB VB series, built for drives that need multiple V-belts to run as one unit. It is identified by its part number and its 8000 mm length. When you are replacing a belt on a banded drive, matching those two details is the first step.
Start with the belt that is coming off the drive. Read the marking on the back of the old belt and compare it with the part number on this page. A banded V-belt ties its ribs together, so the number of ribs and the overall length must match what the drive was set up for. The 2-D 8000 is listed at 8000 mm, and that length is the figure to check against your old belt.
If the marking is worn or the belt is broken, look at the drive itself. Count the grooves on the pulleys to confirm the rib count, and check that the pulleys are aligned and the sheaves are not worn before a new belt goes on. A banded belt is often used where a single V-belt would whip or turn over, so the drive condition matters as much as the part number.
Send the part number, the 8000 mm length and a photo of the old belt marking to MR Industrial Accessories by WhatsApp or email. The team replies promptly and can confirm the belt or suggest an equivalent. If you are replacing a set, include the quantity so the full set can be quoted together.
Dimensions
- Length
- 8000mm
Frequently asked questions
- How do I match the Optibelt 2-D 8000 to the belt I am replacing?
- Compare the part number and the 8000 mm length on the old belt with the details on this page. If the old marking is unreadable, count the pulley grooves and send a photo of the belt so the team can help confirm the match.
- What should I send to request a quote?
- Send the part number 2-D 8000, the length 8000 mm and the quantity you need. A photo of the old belt marking helps confirm the correct banded V-belt.
- Can MR help if I am not sure this is the right belt?
- Yes. Send the details from the old belt or the drive, and the team will review them and suggest an equivalent if needed.