V-belt Optibelt 2-D 4953

OPTIBELT 2-D 4953 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 2-D 4953 and any equivalents.

The Optibelt 2-D 4953 is a banded V-belt from the KB VB series, with a length of 4953 mm. When you are replacing a belt on a multi-groove drive, the most reliable match is the part number and the length marked on the old belt. This page covers what to check before you request a quote.

Start by reading the marking on the back of the belt you are replacing. You are looking for the full part number, including any prefix, and the length. The Optibelt 2-D 4953 carries a length of 4953 mm, so compare that figure directly with the old belt. If the marking is worn or unreadable, measure the outside length of the belt and note the number of ribs or grooves in the drive.

A banded V-belt ties two or more V-belts together with a top cover. That construction keeps the belts running as a set and helps prevent one belt from flipping or running at a different tension. When you replace a banded belt, the new belt must match the old one in profile, length and the number of belts in the band. The 2-D 4953 is a banded V-belt with a length of 4953 mm, so those are the values to confirm against your drive.

If the old belt is still on the machine, check the pulley grooves for wear, rust or debris before you order. Worn grooves can damage a new belt quickly. Send the part number, the length and a photo of the back marking if you have one. The team at MR can confirm the belt or suggest an equivalent from the brands we carry.