V-belt Optibelt 2-C 2750
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- KB VB
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 2-C 2750 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 2-C 2750 and any equivalents.
This Optibelt 2-C 2750 is a banded V-belt from the KB VB series, built for drives where several V-belts run side by side and must act as one unit. The banded construction keeps the belts aligned and reduces the chance of one belt flipping or whipping out of its groove. It is a 2750 mm belt, and you can confirm fit by matching both the part number and the length to the belt you are replacing.
Banded V-belts are common on drives with multiple grooves and long center distances, where single belts can vibrate or turn over. Before ordering, read the marking on the back of the old belt and compare it with 2-C 2750. Check that the profile matches what the pulley grooves take and that the length matches the original. If the old belt is worn or stretched, measure it only as a reference and rely on the part number.
When you replace a banded set, install all belts together. Mixing a new belt with worn ones changes how the load is shared and shortens the life of the set. Inspect the pulleys for worn grooves, oil or debris, and check alignment and tension before the drive runs. Send the part number 2-C 2750 and the application details to our team by WhatsApp or email, and we will help you confirm the right belt or suggest an equivalent.
Dimensions
- Length
- 2750mm
Frequently asked questions
- How do I confirm that the Optibelt 2-C 2750 is the correct belt for my drive?
- Compare the part number and the 2750 mm length with the marking on your existing belt. Also check that the belt profile fits the pulley grooves and that the drive uses a banded V-belt. If you are unsure, send us the old belt marking and details of the drive.
- Can I replace just one belt in a banded set?
- No. Banded V-belts are designed to work as a set. Replace all belts on the drive at the same time so they share the load evenly and run true in the grooves.
- What information should I send to request a quote?
- Send the part number 2-C 2750, the length 2750 mm, and the quantity you need. If you have the old belt, include a photo of the back marking and any details about the drive so we can confirm the match.