V-belt Optibelt 2-B 2000
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- KB VB
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 2-B 2000 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 2-B 2000 and any equivalents.
The Optibelt 2-B 2000 is a banded V-belt from the KB VB series, built to run as a matched set on multi-groove drives. This page covers what to check on the drive and sheaves before a new belt goes on. We carry this belt and quote it by part number.
Before fitting the 2-B 2000, inspect the sheaves. Check groove wear with a groove gauge or a new belt laid in the groove; a belt sitting too deep means the sheave is worn and will wear the new belt quickly. Look for burrs, nicks and rust on the groove flanks, and clean out any buildup. Check sheave alignment with a straightedge across both faces, and confirm both shafts turn freely and the bearings have no play.
Banded belts like this one run as a set, so replace all belts on the drive at the same time. Mixing a new belt with used belts puts uneven load on the bands and shortens the life of the whole set. Check the tension after the first run-in period.
To order, send us the part number 2-B 2000 by WhatsApp or email and we will quote it. If you are unsure about the belt on your drive, send a photo of the marking on the back of the old belt along with the sheave dimensions.
Dimensions
- Length
- 2000mm
Frequently asked questions
- What length is the Optibelt 2-B 2000?
- The belt is listed at 2000 mm. It is a banded V-belt in the KB VB series.
- Can I replace just one belt on the drive?
- Banded belts are designed to run as a set. Replace all belts on the drive at the same time so load is shared evenly across the bands.
- What should I check before fitting a new belt?
- Inspect the sheave grooves for wear, burrs and buildup, verify sheave alignment, and confirm the shafts turn freely before the belt goes on.