V-belt Optibelt 2-B 1550
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- KB VB
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 2-B 1550 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 2-B 1550 and any equivalents.
The Optibelt 2-B 1550 is a banded V-belt from the KB VB series, with a length of 1550 mm. To match it to the belt you are replacing, read the marking on the back of the old belt and compare it with the code on this page. If the numbers and profile match, you have the correct replacement.
A banded V-belt ties two or more V-belts together with a top cover, so they run as a single unit. That construction keeps the ribs aligned and prevents one belt from turning over or seating at a different depth. When you inspect the drive, check the sheave grooves for wear and look for cracks, missing ribs or exposed cord in the old belt. If the old belt is stretched, glazed or has damaged ribs, replacing it with the same code restores the original drive setup.
The 2-B 1550 is identified by its profile and its length in millimeters. The code on the back of the belt is the fastest way to confirm a match. If the old marking is worn off, measure the length and check the profile against this listing. Send the part number 2-B 1550, the old belt marking and the machine or drive details to our team by WhatsApp or email, and we will help confirm the right belt or suggest an equivalent.
Dimensions
- Length
- 1550mm
Frequently asked questions
- How do I match the Optibelt 2-B 1550 to the belt I am replacing?
- Read the code on the back of the old belt. If it reads 2-B 1550 and the profile matches, this is the correct replacement. If the marking is unreadable, measure the length and note the profile, then send those details to our team for confirmation.
- What should I send with my quote request for this belt?
- Send the part number 2-B 1550, the marking from the old belt if it is readable, and the drive or machine details. Photos of the old belt and the sheaves also help our team confirm the match or suggest an equivalent.
- Should I replace all the belts on a banded drive at the same time?
- Yes. On a banded drive, the belts are joined and run as a set. Replacing the full banded belt keeps the ribs aligned and avoids mixing a new belt with a worn one.