V-belt Optibelt 2-A 1900
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- KB VB
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 2-A 1900 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 2-A 1900 and any equivalents.
This Optibelt 2-A 1900 is a banded V-belt from the KB VB series, with a 1900 mm length. Banded V-belts are used on drives where two or more V-belts run side by side and must stay matched in length and tension. To confirm fit, match the part number and the 1900 mm length to the belt you are replacing.
Banded V-belts are common on industrial drives that carry heavy loads or run with pulsating power, because the tie band holds the individual belts together and keeps them from turning over or whipping. If your drive uses more than one V-belt per sheave set, a banded belt is often the correct replacement for a set of single belts.
Confirm the fit before you order. Read the marking on the back of the old belt and compare it with 2-A 1900. Check that the length is 1900 mm and that the belt is a banded V-belt. Also inspect the sheave grooves for wear, and check the condition of the other belts on the drive if it uses more than one banded belt.
Send the part number 2-A 1900, the 1900 mm length and the belt type when you request a quote. If the marking is worn or unreadable, send a photo of the belt and the sheave, and our team can help confirm the correct belt or suggest an equivalent.
Dimensions
- Length
- 1900mm
Frequently asked questions
- How do I confirm this Optibelt 2-A 1900 fits my drive?
- Match the part number 2-A 1900 and the 1900 mm length to the marking on the belt you are replacing. Confirm the belt is a banded V-belt and check the sheave grooves for wear.
- When should I use a banded V-belt instead of single V-belts?
- Banded V-belts are used where multiple V-belts run side by side and need to stay matched, such as on drives with heavy or pulsating loads. They help prevent belt turnover and whip.
- What should I send to request a quote for this belt?
- Send the part number 2-A 1900, the 1900 mm length and the belt type. If the old belt marking is unreadable, send a photo of the belt and the sheave.