V-belt Optibelt 2-A 1422
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- KB VB
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 2-A 1422 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 2-A 1422 and any equivalents.
This Optibelt 2-A 1422 is a banded V-belt from the KB VB series, with a length of 1422 mm. Banded V-belts are used on drives with multiple V-grooves where the belt must run as a single unit, keeping the ribs aligned and resisting the whip and turnover that single belts can develop. Confirm fit by matching the part number and the 1422 mm length to the belt you are replacing.
Before you order, read the marking on the back of the old belt. It should show the part number and the length; if it reads 2-A 1422, this is the belt to quote. Also check that the drive uses a banded belt rather than individual V-belts, since the band ties the ribs together and the sheave grooves must match the belt profile.
If the marking is worn or missing, measure the outside length of the old belt and compare it with 1422 mm. Send the part number, the length and a photo of the marking to our team by WhatsApp or email, and we will confirm the belt or suggest an equivalent where one exists.
Inspect the sheaves at the same time: worn grooves or misalignment will shorten the life of any replacement. On multi-groove drives, replace the full set so the ribs share the load evenly.
Dimensions
- Length
- 1422mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Match the part number 2-A 1422 and the 1422 mm length to the marking on the belt you are removing. If the marking is not readable, measure the old belt and send the details to our team for confirmation.
- Can I replace a single rib of a banded belt?
- No. A banded V-belt is supplied as one unit with the ribs joined by a band. Replace the complete belt, and on drives with multiple belts replace the full set.
- What should I send to get a quote?
- Send the part number 2-A 1422, the length 1422 mm and a photo of the back marking if you have one. Our team replies by WhatsApp or email and can help confirm the belt or suggest an equivalent.