V-belt Optibelt 2-8V 4500 BP2
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- KB Blue Power 2
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 2-8V 4500 BP2 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 2-8V 4500 BP2 and any equivalents.
The Optibelt 2-8V 4500 BP2 is a banded V-belt from the KB Blue Power 2 series, with a length of 11430 mm. Before a belt like this goes onto a drive, the sheaves and the rest of the drive are worth a close look, since worn grooves will shorten the life of any new belt.
Check the sheave grooves for wear, scoring, and buildup of debris or rubber dust. A groove that has worn oversize lets the belt sit too deep, so it slips and runs hot even when tension is correct. Confirm the sheaves are aligned and that the shafts and bearings turn freely, with no excessive play or rough spots.
Inspect the old belt as it comes off. Note uneven wear across the ribs, cracks, and any fraying along the band, because those point to the condition of the drive rather than the belt alone. If the drive uses a matched set, replace the full set together so the load stays shared evenly across all belts.
We carry the Optibelt 2-8V 4500 BP2 for maintenance, engineering, and purchasing teams. Send the part number and the quantity you need by WhatsApp or email, and our team will confirm the belt or suggest an equivalent where one fits the drive.
Dimensions
- Length
- 11430mm
Frequently asked questions
- What should I check on the drive before fitting this belt?
- Look at the sheave grooves for wear and buildup, confirm alignment between the sheaves, and check that the shafts and bearings turn freely. Correcting those points first helps the new belt run as intended.
- How do I identify the belt I am replacing?
- Read the marking on the back of the old belt and compare it with the Optibelt 2-8V 4500 BP2, a banded V-belt from the KB Blue Power 2 series with a length of 11430 mm.
- How do I request a quote?
- Send the part number 2-8V 4500 BP2 and the quantity you need by WhatsApp or email. Our team replies promptly and can help confirm the right belt for the drive.