V-belt Optibelt 2-5V 2650 BP2
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- KB Blue Power 2
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 2-5V 2650 BP2 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 2-5V 2650 BP2 and any equivalents.
This is an Optibelt KB Blue Power 2 banded V-belt, part number 2-5V 2650 BP2. The designation tells you two things before you look at the drive: the belt is built on the 5V profile, and its length is 6731 mm. That is the starting point for matching it to a multi-groove drive.
Banded construction means the ribs are tied together across the top, so the belt runs as one unit over a set of matched sheaves rather than as individual belts. On a drive that carries several 5V grooves, that keeps the ribs from rolling or turning over and keeps them seated evenly. The 5V profile is the narrow wedge section used in higher-load industrial drives, so this belt suits equipment where a standard section would not carry the load.
The 6731 mm length is the dimension to check against the drive before you order. Measure the old belt or read the marking on its back, then compare both the profile and the length to 5V and 6731 mm. If the belt on the machine is a different brand, the profile and length are still what you match; send us the numbers you find and we will confirm the belt or suggest an equivalent.
Dimensions
- Length
- 6731mm
Frequently asked questions
- What do the profile and length on this belt mean?
- The 5V is the profile of the belt, the narrow wedge cross-section. The 6731 mm is the length. Both need to match the drive for the belt to seat and tension correctly.
- How do I confirm this is the right belt for my drive?
- Read the marking on the back of the old belt, or measure its length, and compare it to 5V and 6731 mm. Send us the part number you find and we will help confirm it or suggest an equivalent.
- What should I send to get a quote?
- Send the part number 2-5V 2650 BP2, the quantity you need, and any marking from the old belt. You can reach us by WhatsApp or email and we will reply promptly.