V-belt Optibelt 2-5V 1320 BP2

OPTIBELT 2-5V 1320 BP2 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 2-5V 1320 BP2 and any equivalents.

The Optibelt 2-5V 1320 BP2 is a banded V-belt from the KB Blue Power 2 series, with a length of 3353 mm. When you are replacing a belt on a multi-groove drive, matching the old belt's marking is the most reliable way to get the correct replacement.

Start by reading the marking on the back of the belt you are removing. You are looking for the part number, the series, and the length. The 2-5V 1320 BP2 is a banded V-belt, meaning two or more V-belts are joined by a common backing. This construction keeps the belts from turning over or jumping out of the pulley grooves under shock loads or pulsating drives. If the old belt is too worn to read, measure the outside length with a tape and compare it to the 3353 mm length listed for this belt.

Confirm the cross-section and the number of ribs. The 5V profile is a narrow V-belt cross-section, and the 2- prefix indicates the number of belts joined together. This belt has two joined belts. Check that the pulley grooves are clean and free of wear, and that the sheaves are aligned. A banded belt should be replaced as a complete unit, not as individual belts, because the band keeps the set matched.

If you are unsure whether this is the right belt for your drive, send the part number from the old belt, a photo of the marking, and the pulley diameter to our team. We can confirm the profile and length, and help you find the correct replacement. We carry Optibelt belts and can quote the 2-5V 1320 BP2 for your application.