V-belt Optibelt 1926V 415
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- Vario Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 1926V 415 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 1926V 415 and any equivalents.
The Optibelt Vario Power 1926V 415 is a variable speed belt with a 1054 mm length. The profile and length are the two specifications that determine whether it fits a given drive, so both should be checked against the belt you are replacing. We carry this belt and quote it by part number.
For a variable speed drive, the profile controls how the belt sits in the sheaves and how it responds as the sheave width changes. The 1926V 415 profile identifies the cross-section, while the 1054 mm length fixes the belt's path around the pulleys. A belt that matches in one dimension but not the other will not run correctly, so verify both before ordering.
The marking on the back of the old belt is the most direct reference. Read the profile and length from that marking and compare them with the 1926V 415 and 1054 mm listed here. If the marking is worn or unreadable, measure the belt's outside length and note the profile from the sheave groove.
Send the part number, the profile and the 1054 mm length by WhatsApp or email to request a quote. If you are unsure whether this belt matches your drive, include a photo of the old belt and the sheave markings so we can help confirm the right belt.
Dimensions
- Length
- 1054mm
Frequently asked questions
- What do the profile and length mean on the 1926V 415?
- The profile is the belt's cross-section, which must match the sheave groove. The length is 1054 mm, which must match the drive's required belt path. Both are needed for a correct fit.
- How can I confirm this is the right belt for my drive?
- Check the marking on the back of the belt you are replacing. If it reads 1926V 415 and 1054 mm, this is the same size. If the marking is unclear, measure the old belt and note the sheave profile.
- What information should I send with my quote request?
- Send the part number 1926V 415, the profile, and the 1054 mm length. A photo of the old belt and the sheave markings helps us confirm the match.