V-belt Optibelt 17 x 965 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 17 x 965 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 17 x 965 Li and any equivalents.
The Optibelt VB S=C Plus 17 x 965 Li is a classical V-belt with a B profile, a 17 mm top width, an 11 mm height, a 40-degree angle and a 965 mm length. Before you fit it, check the drive and the sheaves so the new belt runs true and wears evenly.
Inspect each sheave groove for wear, rust, burrs and buildup. Worn or misaligned sheaves can damage a new belt quickly, so confirm the grooves are clean and the pulleys line up before installation. Check the bearings and the shaft for play as well.
Confirm the old belt marking matches this belt: profile B, 17 mm top width, 11 mm height, 40-degree angle and 965 mm length. If the drive uses more than one belt, replace the full set at the same time so the load is shared evenly.
We carry the Optibelt VB S=C Plus 17 x 965 Li and can help confirm it for your application. Send the part number, the belt marking and a photo of the drive by WhatsApp or email, and our team will reply promptly with a quote or an equivalent suggestion.
Dimensions
- Section
- B
- Length
- 965mm
Frequently asked questions
- What should I check on the drive before installing this belt?
- Check the sheave grooves for wear, rust, burrs and buildup, verify pulley alignment, and inspect the bearings and shaft for play. Correcting these before fitting the belt helps it run true and last longer.
- How do I confirm the Optibelt 17 x 965 Li is the right belt?
- Compare the marking on your old belt with this one. This belt is profile B, 17 mm top width, 11 mm height, 40-degree angle and 965 mm length. If your old belt matches those values, it is the same size.
- What do I need to send for a quote?
- Send the part number 17 x 965 Li, the belt marking from the back of the old belt, and a photo of the drive and sheaves. Our team will reply promptly by WhatsApp or email and can confirm the belt or suggest an equivalent.