V-belt Optibelt 17 X 9500 CP
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Conveyor Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 17 X 9500 CP belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 17 X 9500 CP and any equivalents.
The Optibelt 17 X 9500 CP is a classical V-belt from the Conveyor Power series. It has a B profile, a 9500 mm length, a 17 mm top width, an 11 mm height and a 40° angle. Use these dimensions to match it to the belt you are replacing.
Start by reading the marking on the back of the old belt. If it shows 17 X 9500 CP, this is the direct replacement. If the marking is worn or missing, measure the top width and the outside length and compare them with the 17 mm and 9500 mm given here. The B profile and 40° angle are fixed characteristics of this belt and must match the pulley groove.
Check the drive before ordering. Confirm that the pulley grooves are clean and free of wear, and that the belt tension is set to the drive manufacturer's specification. A worn groove or incorrect tension can shorten belt life regardless of the belt's dimensions.
When several belts run together on one drive, replace them as a set. Mixing a new belt with old belts can cause uneven load sharing. To request a quote, send the part number 17 X 9500 CP, the quantity and any details from the old belt's marking by WhatsApp or email. The team can confirm the belt or suggest an equivalent.
Dimensions
- Section
- B
- Length
- 9500mm
Frequently asked questions
- How do I confirm that this is the right belt for my drive?
- Compare the marking on your old belt with 17 X 9500 CP. If the marking is not legible, measure the top width and the outside length and check them against the 17 mm top width and 9500 mm length listed for this belt. Also confirm that the pulley groove matches the B profile and 40° angle.
- What should I include when requesting a quote?
- Send the part number 17 X 9500 CP, the quantity you need and any dimensions or markings from the belt being replaced. If you have a photo of the old belt or the drive, include it. The team will confirm the belt or suggest an equivalent.
- Can I replace just one belt on a multi-belt drive?
- It is best practice to replace all belts on the drive at the same time. Belts that have run together wear at the same rate, and installing a single new belt alongside older ones can lead to uneven tension and load sharing.