V-belt Optibelt 17 x 875 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 17 x 875 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 17 x 875 Li and any equivalents.
This Optibelt VB S=C Plus belt is a classical V-belt with a B profile and an 875 mm length. It is used in industrial drives where a wrapped classical V-belt is specified, such as fans, pumps, compressors and other plant equipment. To confirm fit, check the belt marking and measure the drive sheave grooves against the profile and length shown here.
The belt has a top width of 17 mm, a height of 11 mm and a 40-degree angle. The profile is B and the length is 875 mm. These dimensions match the data on the belt and are the values to compare with the old belt or the drive specification.
When replacing, read the marking on the back of the old belt and compare it with the part number and dimensions above. Inspect the sheaves for wear, alignment and groove condition, and replace belts in sets where the drive uses multiple belts so the load is shared evenly.
For a quote, send the part number 17 x 875 Li, the quantity and any details from the drive nameplate. If the marking is worn or the size is unclear, include photos of the belt and sheaves so the team can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- B
- Length
- 875mm
Frequently asked questions
- How do I confirm this belt fits my drive?
- Compare the profile B, the 875 mm length, the 17 mm top width and the 11 mm height with the old belt and the drive specification. Also check that the sheave groove matches the 40-degree angle.
- What should I send to request a quote?
- Send the part number 17 x 875 Li, the quantity you need and the drive details. If the old belt marking is not clear, include photos of the belt and sheaves.
- Can I replace just one belt on a multi-belt drive?
- On drives that use multiple belts, replace the full set at the same time so all belts carry the load evenly. Use belts of the same profile and length as the originals.