V-belt Optibelt 17 X 8001 CP
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Conveyor Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 17 X 8001 CP belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 17 X 8001 CP and any equivalents.
The Optibelt 17 X 8001 CP is a classical V-belt in the Conveyor Power series with a B profile and a length of 8001 mm. It measures 17 mm across the top, stands 11 mm high, and has a 40-degree angle. To match it to the belt being replaced, read the marking on the back of the old belt and compare each figure with this page.
Start with the profile and the length. The belt you are replacing should show a B profile and an 8001 mm length, or a marking that corresponds to them. If the old belt carries the same code, 17 X 8001 CP, the match is direct. If the marking differs but the profile and length agree, send both sets of numbers for confirmation.
Also check the cross-section. This belt is 17 mm wide at the top, 11 mm high, and cut at 40 degrees. A belt with the same length but a different top width, height, or angle is not the same belt. Photograph the back of the old belt and the drive it runs on, then send the images with the part number.
When you request a quote by WhatsApp or email, include the part number 17 X 8001 CP and the quantity. If the marking is worn or unreadable, send the profile and length you measured along with the old belt's code. Our team can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- B
- Length
- 8001mm
Frequently asked questions
- How do I confirm this belt matches the one I am replacing?
- Read the marking on the back of the old belt. Compare the profile and length with the B profile and 8001 mm length of the 17 X 8001 CP. If the old code matches, the belt is the same. If it does not, send both codes for review.
- What measurements should I send with my quote request?
- Send the part number 17 X 8001 CP and the quantity. If the old belt's marking is unreadable, send the profile, the length, and the top width, height, and angle you measured, plus a photo of the belt and the drive.
- Can you help if the old belt is marked differently?
- Yes. Send the old belt's code and the dimensions you can read. We will compare the profile, length, top width, height, and angle with the 17 X 8001 CP and confirm the right belt or suggest an equivalent.