V-belt Optibelt 17 X 7500 CP

OPTIBELT 17 X 7500 CP belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 17 X 7500 CP and any equivalents.

This Optibelt Conveyor Power belt is a classical V-belt with a B profile and a 7500 mm length. The 17 mm top width, 11 mm height and 40 degree angle identify the cross-section, while the length sets the center distance for the drive. Both figures are the first things to match when you are selecting a replacement.

The profile determines how the belt sits in the pulley groove. A B profile with a 17 mm top width and 11 mm height fits the corresponding groove dimensions, and the 40 degree angle is the included angle of the belt cross-section. If the old belt still shows its marking, compare the profile and the length against this page rather than relying on the machine manual alone, since drives are sometimes modified in service.

The 7500 mm length is stated in millimeters and should be checked against the drive layout, not just the belt that came off. A stretched or worn belt can measure longer than its original length, so a tape measurement of a used belt is not always a reliable reference. Confirm the profile, top width and length before ordering, and send the full part number if you want us to verify the match.

For a quote, send the part number 17 X 7500 CP, the quantity, and the drive or equipment it serves. If you are replacing more than one belt on the same drive, list all the positions so we can quote them together. A photo of the back of the old belt, showing the printed marking, helps confirm the profile and length quickly.