V-belt Optibelt 17 x 710 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 17 x 710 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 17 x 710 Li and any equivalents.
The Optibelt VB S=C Plus 17 x 710 Li is a classical V-belt with a B profile, a 17 mm top width, an 11 mm height and a 40-degree angle. It measures 710 mm in length. Before you fit it, inspect the drive and sheaves so the new belt runs true from the start.
Check sheave grooves for wear, rust, burrs or buildup that can cut the belt or make it ride off-centre. Confirm the sheaves are aligned and the shafts turn freely. Look at the old belt for cracking, glazing, missing cords or uneven wear; those signs often point to a drive problem rather than a belt problem.
Measure the old belt and compare it with the 17 x 710 Li marking. The profile and length on this Optibelt belt are fixed: B profile, 17 mm top width, 11 mm height, 40-degree angle and 710 mm length. If the drive uses more than one belt, replace the full set at the same time so the load stays even across the grooves.
To request a quote, send the part number 17 x 710 Li, the quantity and the drive details by WhatsApp or email. The team replies promptly and can help confirm this B-profile belt or suggest an equivalent.
Dimensions
- Section
- B
- Length
- 710mm
Frequently asked questions
- What should I check on the drive before fitting this belt?
- Inspect the sheave grooves for wear, rust or burrs, confirm the sheaves are aligned and the shafts turn freely, and look for uneven wear on the old belt. Correcting drive issues first helps the new belt seat and run properly.
- How do I identify the belt on the machine?
- Read the marking on the back of the old belt. This Optibelt VB S=C Plus belt is marked 17 x 710 Li, with a B profile, 17 mm top width, 11 mm height, 40-degree angle and 710 mm length.
- What information do you need for a quote?
- Send the part number 17 x 710 Li, the quantity you need and any details about the drive. You can send this by WhatsApp or email, and the team will reply promptly.