V-belt Optibelt 17 x 650 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 17 x 650 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 17 x 650 Li and any equivalents.
This Optibelt VB S=C Plus belt is a classical V-belt with a B profile and a 650 mm length. It is used in industrial drives where a standard classical V-belt cross-section is required. Confirm fit by matching the profile, length, and cross-section dimensions to your drive.
The belt has a top width of 17 mm, a height of 11 mm, and a 40° angle. The profile is B, and the length is 650 mm. These dimensions are the key reference points when checking against an existing belt or drive specification.
Classical V-belts like this are commonly found on fans, pumps, compressors, and other general industrial machinery. To confirm fit, compare the marking on the old belt with the profile and length given here. If the old belt is worn or the marking is unreadable, measure the top width, height, and length and match them to the values above.
When requesting a quote, send the part number 17 x 650 Li or the profile and length. If you are replacing a belt on a drive with multiple belts, check all belts in the set and replace them together to keep the drive running smoothly.
Dimensions
- Section
- B
- Length
- 650mm
Frequently asked questions
- What does the marking 17 x 650 Li mean on this Optibelt belt?
- The marking identifies the belt as a classical V-belt with a B profile and a 650 mm length. The 17 and 11 refer to the top width and height in millimeters.
- How do I confirm this belt fits my drive?
- Compare the profile (B), length (650 mm), top width (17 mm), height (11 mm), and angle (40°) with your existing belt or drive specification. If the old belt is worn, measure it and match the dimensions.
- What should I send to get a quote for this belt?
- Send the part number 17 x 650 Li or the profile and length. If you have a photo of the old belt marking or the drive setup, that can help confirm the correct belt.