V-belt Optibelt 17 x 6000 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 17 x 6000 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 17 x 6000 Li and any equivalents.
This Optibelt VB S=C Plus belt is a classical V-belt with a B profile and a length of 6000 mm. It is used on industrial drives where a wrapped classical V-belt is specified. Confirm fit by matching the profile and length to your drive.
The belt has a top width of 17 mm, a height of 11 mm and a 40-degree angle. These dimensions define how it sits in the pulley groove. If your drive calls for a B profile and a 6000 mm length, this belt matches those two critical dimensions.
Classical V-belts are common on fans, pumps, compressors and other general industrial drives. To confirm fit, check the existing belt marking or measure the outside length and cross-section. The marking on the back of the belt typically shows the profile and length; if it reads B or 17 x 6000 Li, this belt corresponds.
When replacing, inspect the pulleys for wear and alignment, and check the tension. If multiple belts run together, replace them as a set to keep load sharing even. Send the part number and a photo of the old belt marking if you want us to help confirm the right belt.
Dimensions
- Section
- B
- Length
- 6000mm
Frequently asked questions
- What does 17 x 6000 Li mean on this belt?
- It indicates a top width of 17 mm and a length of 6000 mm. The profile is B, and the belt has a 40-degree angle.
- How do I confirm this belt fits my drive?
- Match the profile and length to your drive requirements. Check the old belt marking for B or 17 x 6000 Li, and verify the pulley groove is compatible with a B profile.
- Can you help me identify the correct belt?
- Yes. Send us the part number from the old belt, a photo of its marking, and the drive details. We will help confirm the right belt or suggest an equivalent.