V-belt Optibelt 17 x 4953 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 17 x 4953 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 17 x 4953 Li and any equivalents.
This Optibelt VB S=C Plus belt is a classical V-belt with a B profile and a length of 4953 mm. It is used on drives that accept a 17 mm top width and 11 mm height, with a 40-degree angle. Confirm fit by matching these dimensions and the belt marking to your drive.
Classical V-belts like this one are common on industrial drives such as fans, pumps, compressors and other machinery where a single belt runs in a standard B-section pulley groove. The 17 mm top width and 11 mm height fit pulleys machined for B-profile belts. The 40-degree angle is the included angle of the belt cross-section.
To confirm fit, check the old belt for a legible marking. The code 17 x 4953 Li indicates the top width and the length in millimeters. Measure the top width and height if the marking is worn, and verify that the pulley grooves are clean and free of wear. If the drive uses multiple belts, replace them as a set to keep loads even.
When requesting a quote, send the full belt code, the profile letter, and the length. If you have the old belt, include a photo of the back marking and the pulley arrangement. Our team can help confirm the right belt or suggest an equivalent based on the data you provide.
Dimensions
- Section
- B
- Length
- 4953mm
Frequently asked questions
- What does the code 17 x 4953 Li mean?
- The code gives the top width and the length in millimeters. The profile is B, the top width is 17 mm, the height is 11 mm, and the angle is 40 degrees.
- How do I confirm this belt fits my drive?
- Match the profile B, the 17 mm top width, the 11 mm height, and the 4953 mm length to your pulley grooves and drive layout. Also check the old belt marking for the same code.
- What should I send for a quote?
- Send the full belt code, the profile letter, and the length. If possible, include a photo of the old belt marking and the drive so we can help confirm the fit.