V-belt Optibelt 17 X 4750 CP
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Conveyor Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 17 X 4750 CP belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 17 X 4750 CP and any equivalents.
The Optibelt 17 X 4750 CP is a Conveyor Power classical V-belt in profile B. It measures 4750 mm in length, with a 17 mm top width, 11 mm height and a 40-degree angle.
When you are matching this belt to the one being replaced, start with the marking on the old belt. The profile and the length are the two details that have to line up: this belt is profile B and 4750 mm long. If the old belt is worn or the marking is no longer readable, measure the top width and the outside length and compare them with the 17 mm top width and 4750 mm length listed here.
The 17 X 4750 CP is a classical V-belt, not a narrow wedge belt, so it is selected by its profile and length rather than by a power rating. The 40-degree angle and the 11 mm height are part of the same profile. Send the part number 17 X 4750 CP, or the profile and length you measured, and we will confirm the belt or suggest an equivalent.
Before ordering, inspect the drive: check the sheave grooves for wear, confirm the belt sits correctly in the groove, and look at the other belts on the same drive. If the drive runs more than one belt, replacing the full set keeps the load shared evenly.
Dimensions
- Section
- B
- Length
- 4750mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Read the marking on the belt being replaced. You need profile B and a 4750 mm length. If the marking is gone, measure the top width and the outside length and compare them with the 17 mm top width and 4750 mm length of the 17 X 4750 CP.
- Can you help if my old belt number is different?
- Yes. Send the part number from the old belt, or the profile and length you measured, by WhatsApp or email. We will confirm whether the 17 X 4750 CP fits or suggest an equivalent.
- Should I replace all the belts on the drive at once?
- If the drive uses more than one belt, replacing the full set is the usual practice. It keeps the belts matched and avoids uneven loading between old and new belts.