V-belt Optibelt 17 x 3950 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 17 x 3950 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 17 x 3950 Li and any equivalents.
This Optibelt VB S=C Plus belt is a classical V-belt with a B profile and a length of 3950 mm. The marking 17 x 3950 Li gives you the top width and the length you need to match before you order.
For a maintenance or purchasing professional, the two numbers that matter most on this belt are the profile and the length. The B profile is a classical V-belt cross-section, and the 17 mm top width and 11 mm height define the groove it fits. The 3950 mm length is the datum you compare against the old belt or the drive specification.
The 40-degree angle is part of the profile geometry, so the belt seats correctly in a matched B-section pulley. When you request a quote, send the full part number 17 x 3950 Li along with the Optibelt series VB S=C Plus. If you are replacing a belt that has worn or lost its marking, measure the top width and the outside length and include those values.
We carry the Optibelt VB S=C Plus line and quote by part number through WhatsApp or email. If you need help confirming that this B-profile, 3950 mm belt is the right one for your drive, send a photo of the old belt and the pulley groove dimensions with your request.
Dimensions
- Section
- B
- Length
- 3950mm
Frequently asked questions
- What do the numbers 17 x 3950 Li mean on this Optibelt belt?
- The 17 is the top width in millimeters and 3950 is the length in millimeters. The Li indicates the length designation. This belt has a B profile with a 17 mm top width and an 11 mm height.
- How do I confirm this is the correct replacement belt?
- Check the old belt for a B profile marking and a 3950 mm length. If the marking is worn, measure the top width across the belt and the length around the outside of the belt, then send those measurements with your quote request.
- Can you help if I am not sure about the profile?
- Yes. Send the part number from the old belt, the pulley groove width, and a photo if possible. We will compare it to the Optibelt VB S=C Plus 17 x 3950 Li and reply with the correct belt or a suitable equivalent.