V-belt Optibelt 17 x 3600 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 17 x 3600 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 17 x 3600 Li and any equivalents.
This is an Optibelt VB S=C Plus classical V-belt with a B profile and a length of 3600 mm. To match it to the belt being replaced, check the marking on the old belt and confirm the profile, top width, height and length against these values. The 17 x 3600 Li code gives you the top width and length to compare directly.
Start by reading the back of the old belt. You are looking for the profile letter and the length designation. This belt has a B profile, a top width of 17 mm, a height of 11 mm and a 40-degree angle. Its length is 3600 mm. If the old belt shows the same profile and length, this is the correct replacement size.
When the marking is worn off, measure the old belt. Check the top width and the height with a caliper, and measure the length along the belt. Compare those measurements to the 17 mm top width, 11 mm height and 3600 mm length listed here. The B profile and the 40-degree angle are the other points to confirm before ordering.
If you are replacing more than one belt on the same drive, match every belt in the set to the same profile and length. Send the part number 17 x 3600 Li, or the profile and length you measured, by WhatsApp or email. The team can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- B
- Length
- 3600mm
Frequently asked questions
- How do I match this Optibelt belt to the one I am replacing?
- Read the marking on the old belt and compare the profile, top width, height and length. This belt is a B profile, 17 mm top width, 11 mm height and 3600 mm length. If those match, it is the correct size.
- What if the marking on my old belt is unreadable?
- Measure the old belt with a caliper: top width, height and length. Compare those measurements to the 17 mm top width, 11 mm height and 3600 mm length of this belt. Also confirm the B profile and the 40-degree angle.
- What do I send to request a quote?
- Send the part number 17 x 3600 Li, or the profile and length you measured from the old belt, by WhatsApp or email. The team will confirm the right belt or suggest an equivalent.